DSM 6.2.4-25554

Awatar użytkownika
xurc
Wtajemniczony
Posty: 191
Rejestracja: wt kwie 05, 2016 10:00 am

DSM 6.2.4-25554

Post autor: xurc »

Version: 6.2.4-25554
(2021-02-23)
Important Note

Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it.
The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
This update will restart your Synology NAS.
Compatibility & Installation

Enhanced the password policy. Passwords must exclude usernames and descriptions, include both upper-case and lower-case letters as well as numerical digits. The minimum password length is 8 characters.
Fixed a compatibility issue between the Geminilake platform and virtual machines running Windows 10.
Adds drive compatibility information to notify users that some drives are not available for selection due to compatibility issues.
On a newly installed version of DSM, file rename and deletion log events for SMB will be enabled by default.
What's New

Users can now set 10 email addresses to receive system notifications.
Enhanced domain database synchronization performance by syncing only altered data.
Supports bad block detection on Synology SSDs.
Supports the updating of Synology HDD and SSD firmware directly via DSM.
Improved fan speed control based on the Synology network interface card temperature for 19-series and newer models.
Fixed Issues

Fixed an issue where the "Enable Web Assistant" option didn't work on NVR216 and NVR1218.
Fixed an issue where the date and time formats for scheduled tasks were inconsistent in the widget and system settings.
Fixed an issue where scheduled tasks may fail to be executed or modified.
Fixed an issue where tasks scheduled at a high frequency generated a lot of logs and occupied system partitions.
Fixed an issue where the custom welcome text may differ on the preview and actual login page due to character limits.
Fixed an issue where data could still be written to LUNs after the volume runs out of space.
Fixed an issue where if Wi-Fi dongles are installed, some available network interfaces weren't listed when users edit iSCSI targets.
Fixed an issue where iSCSI services may be unstable when the host is too busy or when users disable iSCSI targets and ending sessions simultaneously.
Fixed an issue where initiators couldn't connect to the iSCSI target after ethernet interfaces reconnect in a high-availability cluster.
Fixed an issue where packages may not operate properly when drives migrated from another Synology NAS cause volume ID conflicts.
Fixed an issue where users may not be able to find their Synology NAS in My Network Places on Windows when WS-Discovery isn't operating properly.
Fixed an issue where Log Center didn't record recycle bin enabling/disabling events.
Fixed a security vulnerability regarding Sudo. (Synology-SA-21:02)
Fixed multiple security vulnerabilities. (Synology-SA-21:03)
Limitations

In response to the enhancement of domain database synchronization efficiency, the domain user/group list will be updated once an hour when it is created with Synology Directory Server.
https://synopackage.com
https://www.facebook.com/synopackage/
Sprzęt:
DS718+ (apollolake): 2x2TB (WD RED) SHR ,8GB RAM
Poprzedni:
DS215j
Awatar użytkownika
michau
Wyrocznia
Posty: 1172
Rejestracja: pt gru 18, 2015 12:03 pm
Lokalizacja: Mińsk Mazowiecki

Re: DSM 6.2.4-25554

Post autor: michau »

DSM jeszcze nie wykrywa aktualizacji ale można pobrać i ręcznie dokonać aktualizacji.

https://archive.synology.com/download/O ... .2.4-25554

Wymaga ponownego uruchomienia urządzenia.

Adds drive compatibility information to notify users that some drives are not available for selection due to compatibility issues.

Ciekawe czy to związane z wprowadzeniem ich dysków? Na jakiej podstawie będą te informacje.

Aktualizacja zakończona.

Po aktualizacji pojawiły się aktualizacje pakietów.
NAS:
[ MASTER ] Synology DS1515+ | 16 GB RAM | DSM 7 | 5 x WD Red WD60EFRX Btrfs RAID 5
Awatar użytkownika
xurc
Wtajemniczony
Posty: 191
Rejestracja: wt kwie 05, 2016 10:00 am

Re: DSM 6.2.4-25554

Post autor: xurc »

michau pisze: wt lut 23, 2021 11:12 am DSM jeszcze nie wykrywa aktualizacji ale można pobrać i ręcznie dokonać aktualizacji.
Jakoś mnie to nie dziwi... jeszcze pewnie przez wiele dni nie wykryje
https://synopackage.com
https://www.facebook.com/synopackage/
Sprzęt:
DS718+ (apollolake): 2x2TB (WD RED) SHR ,8GB RAM
Poprzedni:
DS215j
Awatar użytkownika
mikhnal
Darth Vader
Posty: 2728
Rejestracja: pt gru 11, 2015 8:55 am
Lokalizacja: Warszawa

Re: DSM 6.2.4-25554

Post autor: mikhnal »

Coś takiego się pojawiło:

ame.jpg
Nie masz wymaganych uprawnień, aby zobaczyć pliki załączone do tego posta.
DS3018xs
DSM 7.2.1-69057 Update 4
32GB RAM 2x KSM24SED8/16ME DDR4 2400 CL17 ECC mod
6x 10TB WD Red WD100EFAX RAID5 btrfs
2x SNV3500-400G read/write SSD cache @ E10M20-T1 + 10GbE LAN
2x Noctua NF-A9 fan mod
RT6600ax + WRX560
SRM 1.3.1-9346 Update 9
Awatar użytkownika
michau
Wyrocznia
Posty: 1172
Rejestracja: pt gru 18, 2015 12:03 pm
Lokalizacja: Mińsk Mazowiecki

Re: DSM 6.2.4-25554

Post autor: michau »

Dostosowują się do nowych kodeków?
NAS:
[ MASTER ] Synology DS1515+ | 16 GB RAM | DSM 7 | 5 x WD Red WD60EFRX Btrfs RAID 5
krowka1978
Stały Bywalec
Posty: 327
Rejestracja: wt gru 15, 2015 6:42 pm

Re: DSM 6.2.4-25554

Post autor: krowka1978 »

Zainstalowałem i widzę problemy z logowaniem dwuetapowym z apek androidowych. Pomimo poprawnego kodu nie wpuszcza, nie pamięta urządzenia bez zapamiętania danych logowania, po ponownym zainstalowaniu apki/wyzerowaniu danych jest ok, ale jak się wyloguje, to ponownie lipa.

"Poprawili" również sieciowy serwer UPS.
To tyle z zauważonych problemów, które mnie dotknęły.
Kto nie musi, to niech tego badziewia nie instaluje.
DS1513+
DSM 7.1.1
4GB RAM
5x 3TB WD RED WD30EFRX RAID 5 btrfs
DS1819+
DSM 7.2
32GB RAM ECC Kingston (2x KSM24SED8/16ME)
4x 8TB Seagate IronWolf ST8000VN004 RAID 6 btrfs
2x Seagate IronWolf 525 SSD M.2 1TB RW cache RAID 1 + E10M20T1
RT2600ac
SRM 1.3
2x MR2200ac (Mesh)
krowka1978
Stały Bywalec
Posty: 327
Rejestracja: wt gru 15, 2015 6:42 pm

Re: DSM 6.2.4-25554

Post autor: krowka1978 »

Przed chwilą wysłałem zgłoszenia z tymi błędami. Mam nadzieję, że zadziałają lepiej niż w sprawie routerów.
DS1513+
DSM 7.1.1
4GB RAM
5x 3TB WD RED WD30EFRX RAID 5 btrfs
DS1819+
DSM 7.2
32GB RAM ECC Kingston (2x KSM24SED8/16ME)
4x 8TB Seagate IronWolf ST8000VN004 RAID 6 btrfs
2x Seagate IronWolf 525 SSD M.2 1TB RW cache RAID 1 + E10M20T1
RT2600ac
SRM 1.3
2x MR2200ac (Mesh)
pdz
Zawsze On-Line
Posty: 443
Rejestracja: śr gru 27, 2017 2:34 pm

Re: DSM 6.2.4-25554

Post autor: pdz »

Zapewne dlatego nie widać aktualizacji na NAS , wiedzą, że osoby, które zrobią to świadomie są bardziej ogarnięte i liczą się z ewentualnymi problemami.
1 x DS220+ , 6GB RAM, 1x14TB WD Gold , USB Copy 4TB Seagate SkyHawk , router RT6600ax
1 x RS4017XS+ , 64GB RAM , 16x14TB WD Gold , 1 x M2D20 + 2 x SNV3500-400G read/write
3 x RS4021XS+ , 64GB RAM , 5x12TB Synology , 4 x 1.92TB Synology
2 x RS4021XS+ , 64GB RAM , 5x12TB Synology
1 x RS2418RP+ , 64GB RAM , 8x14TB WD Gold
Awatar użytkownika
michau
Wyrocznia
Posty: 1172
Rejestracja: pt gru 18, 2015 12:03 pm
Lokalizacja: Mińsk Mazowiecki

Re: DSM 6.2.4-25554

Post autor: michau »

Aktualizacje nie są dostępne automatycznie na każdym urządzeniu i w każdym kraju. Trzeba zaczekać na swoją kolejkę albo instalować ręcznie.
NAS:
[ MASTER ] Synology DS1515+ | 16 GB RAM | DSM 7 | 5 x WD Red WD60EFRX Btrfs RAID 5
krowka1978
Stały Bywalec
Posty: 327
Rejestracja: wt gru 15, 2015 6:42 pm

Re: DSM 6.2.4-25554

Post autor: krowka1978 »

Niestety ten system jest dostępny na stronie głównej pobierania, więc jeżeli ktoś konfiguruje nowy NAS to zainstaluje 6.2.4.
DS1513+
DSM 7.1.1
4GB RAM
5x 3TB WD RED WD30EFRX RAID 5 btrfs
DS1819+
DSM 7.2
32GB RAM ECC Kingston (2x KSM24SED8/16ME)
4x 8TB Seagate IronWolf ST8000VN004 RAID 6 btrfs
2x Seagate IronWolf 525 SSD M.2 1TB RW cache RAID 1 + E10M20T1
RT2600ac
SRM 1.3
2x MR2200ac (Mesh)
ODPOWIEDZ