DSM 6.2.3-25426 Update 3

Awatar użytkownika
mikhnal
Darth Vader
Posty: 2728
Rejestracja: pt gru 11, 2015 8:55 am
Lokalizacja: Warszawa

DSM 6.2.3-25426 Update 3

Post autor: mikhnal »

Synology pisze: Version: 6.2.3-25426 Update 3
(2020-11-26)

Important Note
Your Synology NAS may not notify you of this DSM update because of the following reasons. If you want to update your DSM to this version now, please click here to manually update it. Only Synology NAS with DSM 6.2.3 installed can be updated to this version.
The update is not available in your region yet. The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
This update will restart your Synology NAS.

Compatibility & Installation
Photo Station must be updated to version 6.8.14-3501 or above to be compatible with this update.

What's New
Enhanced NFSv4 connection stability.
Increased the maximum number of IP camera channels on FS6400 to 150.

Fixed Issues
Fixed an issue where support ticket submissions might fail in a certain version of Google Chrome.
Fixed an issue where Windows 10, version 2004 virtual machines might fail to power on when users select UEFI as the firmware.
Fixed an issue where there might be network disconnections on Virtual DSM.
Enhanced the stability of SSD caches when multiple processes are accessing the same cache at the same time.
Fixed an issue where CMS managed servers might not connect to the CMS host after they restarted.
Fixed an issue where disks in Resource Monitor performance charts were not displayed in the correct sequence. Affected models include: 21-series: DS1621+, 20-series: FS6400, DS1520+, DS920+, DS720+, DS420+, DS220+
Fixed an issue where when users access files on DSM using Windows software via SMB, system performance might be affected. This is because of Windows software's continuous attempts to access the shared folders to which it has no permissions.
Fixed an issue where Windows File Explorer might not update file deletion or removal in real time when folders are mounted via SMB.
Fixed an issue where the system might not report the power status correctly on SA3200D.
Fixed an issue where the setting pages after first-time DSM installation might not launch on Synology NAS models with multiple LAN ports.
Fixed an issue where users were not able to empty the recycle bin of the "usbshare" shared folder.
Fixed an issue where administrators were not able to change the "User must change password at next logon" setting via Windows RSAT.
Fixed an issue where domain users could not be added to built-in groups via Windows RSAT.
Fixed an issue where enabling the "Collect debug logs" option for SMB might result in excessive system space usage.
Fixed an issue where the system might send incorrect port forwarding notifications after a restart.
Fixed an issue where SHA-1 certificates might disappear when users click "Upgrade certificate".
Fixed an issue where DSM might block users' IP addresses and create excessive logs when they tried to sign in after re-installing DSM.
Fixed an issue where incorrect drive compatibility information was displayed after drive migration.
Enhanced the stability of network interface cards on certain models.
Fixed an issue where links in password reset emails did not work when the URLs exceed the maximum length.
Fixed an issue where packages did not update automatically due to dependency problems.
Enhanced SAS controller stability during system shutdowns.
Fixed multiple security vulnerabilities. (Synology-SA-20:26)
Supports Let's Encrypt ISRG certificates.

https://www.synology.com/pl-pl/support/download
DS3018xs
DSM 7.2.1-69057 Update 4
32GB RAM 2x KSM24SED8/16ME DDR4 2400 CL17 ECC mod
6x 10TB WD Red WD100EFAX RAID5 btrfs
2x SNV3500-400G read/write SSD cache @ E10M20-T1 + 10GbE LAN
2x Noctua NF-A9 fan mod
RT6600ax + WRX560
SRM 1.3.1-9346 Update 9
wlodekh
Wtajemniczony
Posty: 190
Rejestracja: śr sty 27, 2016 12:37 pm

Re: DSM 6.2.3-25426 Update 3

Post autor: wlodekh »

Dziwna sytuacja mnie spotkała. Update ściągnięty z oficjalnej strony:
https://archive.synology.com/download/D ... k/25426-3/
zainstalował się normalnie, potem informacja, że system uruchomi się ponownie i tu zonk: serwer czarny, nic się nie da zrobić, przycisk power nie działa. Wyjąłem kabel od prądu i po ponownym włożeniu serwer dopiero się uruchomił. Wszystko jest ok, ale stres był.
DS720+ | RAM Crucial 8GB DDR-2666 SODIMM | 2 x WD Red 6TB | Btrfs
Awatar użytkownika
xurc
Wtajemniczony
Posty: 191
Rejestracja: wt kwie 05, 2016 10:00 am

Re: DSM 6.2.3-25426 Update 3

Post autor: xurc »

Mnie dziwi, że ten update zawiera rozwiązania krytycznych podatności, a moje urządzenie nie wykrywa żadnej aktualizacji! Co gorsza twierdzi, że mam najnowszą wersję (co jest po prostu kłamstwem). Rozumiem takie podejście, że jest nowa wersja (np. DSM 7.0) to nie wszyscy muszą instalować na raz, ale umówmy się: im dłużej zwlekamy z instalacją nowej wersji rozwiązującą krytyczne podatności a ta wersja jest dostępna to nie prowadzi do niczego dobrego.

Co o takim podejściu sądzicie?Jak dla mnie bardzo słabe podejście. Powinna być chociaż informacja, że jest dostępna wersja i ręcznie mogę ją sobie zainstalować (nie każdy pewnie chce instalować od razu), a tak trzeba szukać samemu.
Nawet sklepałem w tej sprawie ticket do Synology, ale... za pierwszym razem dostałem "Error" w jsonie, a za drugim po prostu nic...na trzeci raz jeszcze nie znalazłem czasu.
https://synopackage.com
https://www.facebook.com/synopackage/
Sprzęt:
DS718+ (apollolake): 2x2TB (WD RED) SHR ,8GB RAM
Poprzedni:
DS215j
krowka1978
Stały Bywalec
Posty: 327
Rejestracja: wt gru 15, 2015 6:42 pm

Re: DSM 6.2.3-25426 Update 3

Post autor: krowka1978 »

Na DS1513+ i DS1819+ poszło bez problemu.
DS1513+
DSM 7.1.1
4GB RAM
5x 3TB WD RED WD30EFRX RAID 5 btrfs
DS1819+
DSM 7.2
32GB RAM ECC Kingston (2x KSM24SED8/16ME)
4x 8TB Seagate IronWolf ST8000VN004 RAID 6 btrfs
2x Seagate IronWolf 525 SSD M.2 1TB RW cache RAID 1 + E10M20T1
RT2600ac
SRM 1.3
2x MR2200ac (Mesh)
krowka1978
Stały Bywalec
Posty: 327
Rejestracja: wt gru 15, 2015 6:42 pm

Re: DSM 6.2.3-25426 Update 3

Post autor: krowka1978 »

Ręcznie ściągałem i instalowałem, wczoraj rano.
DS1513+
DSM 7.1.1
4GB RAM
5x 3TB WD RED WD30EFRX RAID 5 btrfs
DS1819+
DSM 7.2
32GB RAM ECC Kingston (2x KSM24SED8/16ME)
4x 8TB Seagate IronWolf ST8000VN004 RAID 6 btrfs
2x Seagate IronWolf 525 SSD M.2 1TB RW cache RAID 1 + E10M20T1
RT2600ac
SRM 1.3
2x MR2200ac (Mesh)
Awatar użytkownika
SnejX
Uczeń Mistrza
Posty: 605
Rejestracja: czw mar 23, 2017 9:12 pm
Lokalizacja: Łódź

Re: DSM 6.2.3-25426 Update 3

Post autor: SnejX »

xurc pisze: wt gru 01, 2020 3:54 pm Mnie dziwi, że ten update zawiera rozwiązania krytycznych podatności, a moje urządzenie nie wykrywa żadnej aktualizacji!
Całkowicie się z tobą zgadzam, powinno być przynajmniej info, że coś jest i wtedy to moja decyzja a tak gdyby nie forum to bym nawet nie wiedział.
Często czytam tutaj o aktualizacjach a mój nas sam widzie je dopiero po 2 tygodniach.
Awatar użytkownika
Teddy47
Wtajemniczony
Posty: 168
Rejestracja: wt kwie 02, 2019 1:18 pm
Lokalizacja: Zdzieszowice
Kontakt:

Re: DSM 6.2.3-25426 Update 3

Post autor: Teddy47 »

U mnie na 1517+ dzisiaj się pojawiła. Ale na 716+ jak sprawdzam, to jej nie widzi. Poczekam do weekendu i zacznę instalować. Mam 32 urządzenia do zrobienia.
---
Wojtek
DS1517+ 16GB + 5xWD Ultrastar 14TB + SSD cache (M2D18 + 2x WDS100T1R0B)
Obrazek
Przemuss
Godfather
Posty: 1303
Rejestracja: wt gru 15, 2015 12:19 pm
Lokalizacja: Żyrardów

Re: DSM 6.2.3-25426 Update 3

Post autor: Przemuss »

Właściwie minęło już 14 dni od premiery tej łatki a moje 3 synki do tej pory jej nie wyniuchały.
Co najmniej to dziwne.
Administratorzy dzielą się na tych, którzy robią kopie zapasowe i tych, którzy będą je robili.

Serwery NAS:
Synology DS211j, DS1511+, RS2212RP+ DS1513+

"Zasłanianie się dysleksją, to jak chwalenie się małym fiu...."- by Pati
gg 2101676
solid
Amator
Posty: 53
Rejestracja: sob sty 09, 2016 5:37 pm
Lokalizacja: Poznań

Re: DSM 6.2.3-25426 Update 3

Post autor: solid »

Musiałeś trafić na:
Important Note
Your Synology NAS may not notify you of this DSM update because of the following reasons
DS218+ 10GB RAM - DSM 7.1.1-42962 Update 5
Awatar użytkownika
michau
Wyrocznia
Posty: 1172
Rejestracja: pt gru 18, 2015 12:03 pm
Lokalizacja: Mińsk Mazowiecki

Re: DSM 6.2.3-25426 Update 3

Post autor: michau »

DS1515+ pojawił się komunikat o możliwości aktualizacji.
NAS:
[ MASTER ] Synology DS1515+ | 16 GB RAM | DSM 7 | 5 x WD Red WD60EFRX Btrfs RAID 5
ODPOWIEDZ