Re: DSM 6.2.3-25423

#23
Tak w ogóle przedwczoraj wydano nowszą wersję DSM 6.2.3 ale build 25426.
Tak to opisali w release notes:
Version: 6.2.3-25426
(2020-05-13)
Important Note

The update is expected to be available for all regions within the next few weeks, although the time of release in each region may vary slightly. If you want to update to the latest version now, please go to Download Center and manually update your DSM.
This update includes fixes to the below issues mentioned in 6.2.3-25423.
Fixed the issue where the automatic mounting of encrypted shared folders might result in the loss of indexing rules and the failure of the search function.
Fixed the issue where the Synology NAS equipped with NVMe device might be woken up from hibernation by the update of NVMe device's health status cache.
This update will restart your Synology NAS.
Removed the support for Google Cloud Print in DSM 6.2.3 and above.
To avoid the interruption of iSCSI service, the automatic DSM update and your power schedule to shut down may not be executed as expected if there are any active iSCSI sessions.
Removed TWNIC from the list of DDNS service providers on DSM 6.2.3 since TWNIC will stop accepting new registrations for DSM as of Jul. 1, 2020. Your current TWNIC DDNS services can still be used and edited but will not be available again once deleted from DSM.
This is the last major DSM version (6.2) that supports the video conversion to .flv and MPEG-4 Part 2 on certain models (RS814, RS214, DS414, DS414slim, DS414j, DS216se, DS215j, DS214+, DS214, DS214se, DS213j, DS120j, DS119j, DS115, DS115j, and DS114) in consideration of the termination of Adobe's support for Flash Player by the end of 2020.
What's New in DSM 6.2.3

Thin Provisioning LUN will become protected upon insufficient volume space, preventing clients from writing data to the LUN while allowing read-only access to the existing data.
Added support for domain users to sign in to DSM using a UPN (user principal name) via file protocols (including SMB, AFP, FTP, and WebDAV).
Added support for the option of forcing password changes for importing local users.
Enhanced the compatibility of the imported user list, providing clearer error messages when the imported file contains syntax errors.
Added support to record only the events of SMB transfer selected by the user, providing transfer logs that meet the requirements more closely.
Added support for client users to monitor the changes of subdirectories under shared folders via SMB protocol.
Added details of desktop notifications to facilitate users' timely responses.
Added support for external UDF file system devices.
Added support for the Open vSwitch option in a high-availability cluster.
Added support for IP conflict detection, providing logs and notifications accordingly.
Added support for Let's Encrypt wildcard certificates for Synology DDNS.
Added support to waive the need of DSM login again through an HTTPS connection after a change in client's IP address.
Added support for hardware-assisted locking for Thick Provisioning LUN on an ext4 volume.
Added support for customized footer message on DSM login pages.
Fixed Issues

Fixed the issue where certain cities might be mapped to incorrect time zones.
Fixed the issue where LDAP users could not be notified of the upcoming password expiration.
Fixed the issue where the upload of LDAP certificate could not overwrite the original one with the same file name.
Fixed the issue where the application permissions settings might not be applied properly to the Domain Users group when such group in Windows AD domain was named other than "Domain Users".
Fixed the issue of inaccurate time of usage history in Resource Monitor.
Improved system responsiveness by reducing the latency of the Btrfs file system in certain scenarios.
Fixed the issue where SNMP did not provide the indices of Disk and RAID correctly.
Fixed the issue where the recycle bin of an encrypted shared folder might not be emptied properly.
Enhanced the DSM login performance for multiple concurrent logins.
Adjusted the personal notification mechanism to comply with the latest Gmail API.
Fixed the issue where the iSCSI service might be interrupted when the LUN backup task is stopped.
Removed the function of expanding the capacity of a block LUN.
Known Issues & Limitations

Access to DSM via HTTPS using Google Chrome on a client device running macOS 10.15 might fail after a DSM update from an older version.
To run Centralized Management System (CMS) on Surveillance Station after updating to DSM 6.2.3-25426, Surveillance Station 8.2.7 or above is required.
Version: 6.2.3-25423
(2020-04-15)
Important Note

This update has been recalled on May 13, since the search function across the system might fail if you have encrypted shared folder and Synology Universal Search 1.4.1 or earlier on your DSM 6.2.3. The issue has been fixed in 6.2.3-25426. (Updated May 13th)
https://search.synopackage.com
https://www.facebook.com/synopackage/
Sprzęt:
DS718+ (apollolake): 2x2TB (WD RED) SHR ,2GB RAM
Poprzedni:
DS215j

Re: DSM 6.2.3-25423

#25
To praktycznie ta sama wersja (patrząc na release notes) tym bardziej, że teraz release notes dla poprzedniego buildu zaorano i dodano zdawkową informację, że wszystko zostało poprawione w nowym buildzie... dziwne, że nie zrobili tego przez dodanie "Update 1" jak to zwykle bywa
Porównanie tutaj: https://www.diffchecker.com/1PZMiz7V
https://search.synopackage.com
https://www.facebook.com/synopackage/
Sprzęt:
DS718+ (apollolake): 2x2TB (WD RED) SHR ,2GB RAM
Poprzedni:
DS215j

Re: DSM 6.2.3-25423

#26
Jak ktoś myśli o update to niech się wstrzyma do 2 kolejnych poprawek.
Ja to się niestety w ogóle pospieszyłem i zainstalowałem ręcznie 6.2.3-25426.

Minusy:

DS918+
1) znów od razu pojawiły się zwisy takie, że nie odpowiada (jak rok temu też po update) i hard reset trzeba robić/
2) Wysypał się Active Backup for Business - rozwiązanie jakie zaproponowało Synology to usuń wszystko i zrób na nowo.... z rożnych przyczyn mi się to zupełnie nie uśmiecha :-(
3) Wysypał się "hardwareowo"? Jak jest niefirmowy RAM 8GB w slocie 2 to DS nie działa (dostaję "blue light of death"). Mam w tym DSie 16GB (2x8GB) Kingstona od 2 lat i było ok. Co ciekawe firmowe 4gb w slocie 2 działa, i nieformowe 8gb w slocie 1 też.... być może przyczyna jest inna. Support odpowiedział że reinstaluj wszystko i włóż firmowy RAM... też mi się nie uśmiecha, tym bardziej że firmowy jest tylko 4GB.

Plusy:
1) DS713+ zyskał nowe życie na tym software, interface jest responsywny jak w wersji 5.x albo prawie jak w DS918+
(po update do 6.x był baaaardzo wolny, pomimo 4GB RAM)


Ktoś ma podobne problemy? Jakieś rozwiązania?

Re: DSM 6.2.3-25423

#27
Zaktualizowałem 28 urządzeń w ciągu ostatniego tygodnia. Od DS713+ do RS3617RPxs. W każdym jest nieoryginalny RAM. Zero problemów. Masz jakieś zmiany w konfiguracji robione spoza DSM?
---
Wojtek
DS1517+ 16GB + 5xWD Ultrastar 14TB + SSD cache (M2D18 + 2x WDS100T1R0B)

Re: DSM 6.2.3-25423

#28
Nie nic - Wszystko z DSM.
Update - działa jak jest tylko jedna kość 8GB (Kingston HyperX HX318LS11IB/8), ew 8GB + 4GB oryginalne od Synology. Nigdy 2 kości 8GB (jak przez poprzednie 2 lata).
Przetestowałem wszystkie możliwe konfiguracje 3 kości (8, 8, 4GB) w 2 slotach.

Kto jest online

Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 2 gości