SRM 1.2

pepeEL
Trochę Wie
Posty: 71
Rejestracja: śr gru 16, 2015 9:37 pm
Lokalizacja: Philippines
Kontakt:

SRM 1.2

Post autor: pepeEL »

Wreszcie wydany SRM 1.2
https://global.download.synology.com/do ... c_7742.pat

(2018-10-04)
What'S New

Added the build-in application Wi-Fi Connect for wireless related settings.
Added support for Mesh Wi-Fi on RT2600ac and MR2200ac.
Added support for Mesh Wi-Fi system in AP mode on RT2600ac and MR2200ac.
Added Network Map support for Wi-Fi system management on RT2600ac and MR2200ac.
Added support for enabling/ disabling Wi-Fi password mask.
Added support for WPA3 Personal/Enterprise security encryption on RT2600ac and MR2200ac.
Added support for Wi-Fi Enhanced Open (OWE) security encryption on RT2600ac and MR2200ac.
Added support for Smart Connect in Guest Network on RT2600ac and MR2200ac.
Added support for Guest Portal in Guest Network.
Added support for Password Rotation in Guest Network.
Added support for applying MAC filters to the Primary Wi-Fi Network alone or to the Guest Network as well.
Added support for enabling/disabling AMDPU.
Added the build-in package Safe Access for parental control and security related settings.
Added support for the Threat Prevention package.
Added support for DHCP options in ISP settings during the first time installation.
Add support for manual IPv6 setup when the primary network interface is set at PPPoE.
Added support for auto device name detection and more icons on the device list.
Added support for TCP reset, SYN flood and ICMP flood options in DoS protection.
Added support for Zero-wait DFS on RT2600ac.
Added support for auto updates of databases including IP Geolocation, Domain Name, Google Safe Browsing and Threat Intelligence.
Added support DHCPv6-PD and IPv6 Relay on RT1900ac with Client mode.
Fixed Issues

Fixed an issue where Smart WAN might not work properly with Policy Route settings.
Fixed an issue where the MTU can be set under 1280 with IPv6.
Fixed an issue where SRM might fail to finish the First Time Installation on macOS via Wi-Fi.
Fixed an issue where SRM web interfaces might not be accessible.
Fixed an issue where Log Center might not record properly.
Fixed an issue where MAC addresses might be changed on RT1900ac when the network interface is set at Secondary WAN.
Fixed an issue where the link of Traffic Report might fail to show multiple DDNS addresses.
Fixed an issue where MAC clone cannot be enabled through PPPoE.
Fixed an issue where certain items of Traffic Control and Firewall might not display properly when they are selected.
Fixed an issue where Guest Network might access private networks.
Fixed an issue where the connection speed might decrease when LG V30 Plus is used as the USB tethering device.
Fixed an issue where SRM might fail to back up and restore when the operation mode is changed.
Fixed an issue where SRM might show incorrect messages when logging out.
Fixed an issue where Pass-through might not work properly in Guest Network.
Security Updates

Fixed a security vulnerability regarding Linux kernel (CVE-2018-5391)
Known Issues and Limitations

The IPv6 tunneling page will be removed from Network Center.
Safe Access, VPN Plus Server reports will be rotated when their storage volumes reach 200MB.
iOS clients might fail to connect to Synology Router when the wireless security encryption is set at WPA2/WAP3-Personal.
Customized policies of Parental Control of devices on SRM 1.1 cannot be migrated to Safe Access on SRM 1.2.
If the Synology Router is set at Wireless Client Mode, then the web filter and security protection of Safe Access might not work correctly.
SRM cannot back up and restore IPTV settings from RT2600ac or RT1900ac to MR2200ac.
There cannot be two mesh Wi-Fi systems in one subnet.
Wi-Fi points can only be added into Wi-Fi systems via Wi-Fi. If Ethernet backhaul is connected, please remove the cable before adding new Wi-Fi points.
Intrusion Prevention not be supported on SRM 1.2 and above.
Awatar użytkownika
mikhnal
Darth Vader
Posty: 2728
Rejestracja: pt gru 11, 2015 8:55 am
Lokalizacja: Warszawa

Re: SRM 1.2

Post autor: mikhnal »

Dzięki za info!
DS3018xs
DSM 7.2.1-69057 Update 4
32GB RAM 2x KSM24SED8/16ME DDR4 2400 CL17 ECC mod
6x 10TB WD Red WD100EFAX RAID5 btrfs
2x SNV3500-400G read/write SSD cache @ E10M20-T1 + 10GbE LAN
2x Noctua NF-A9 fan mod
RT6600ax + WRX560
SRM 1.3.1-9346 Update 9
pepeEL
Trochę Wie
Posty: 71
Rejestracja: śr gru 16, 2015 9:37 pm
Lokalizacja: Philippines
Kontakt:

Re: SRM 1.2

Post autor: pepeEL »

Właściwie wszystkie pakiety zostały też zaaktualizowane. VPN trzeba też zaktualizować bo inaczej nie działa...

I zobaczymy czy szybciej działa IPS bo takie były zapewnienia Synology że w wersji 1.2 zostanie to poprawione... Tym bardziej aplikacja Intrusion Prevention już na 1.2 nie działa.
Awatar użytkownika
mikhnal
Darth Vader
Posty: 2728
Rejestracja: pt gru 11, 2015 8:55 am
Lokalizacja: Warszawa

Re: SRM 1.2

Post autor: mikhnal »

Trochę pozmieniali, nowe opcje są w parametrach wifi.
DS3018xs
DSM 7.2.1-69057 Update 4
32GB RAM 2x KSM24SED8/16ME DDR4 2400 CL17 ECC mod
6x 10TB WD Red WD100EFAX RAID5 btrfs
2x SNV3500-400G read/write SSD cache @ E10M20-T1 + 10GbE LAN
2x Noctua NF-A9 fan mod
RT6600ax + WRX560
SRM 1.3.1-9346 Update 9
Carty
Amator
Posty: 36
Rejestracja: śr kwie 05, 2017 8:41 pm

Re: SRM 1.2

Post autor: Carty »

Wrażenia tak na szybko:
- w końcu można wyłączyć filtrowanie MAC dla sieci gościnnej :)
- Parental Control, a raczej nowe wcielenie, trzeba skonfigurować od zera (przynajmniej u mnie tak to wygląda po aktualizacji)
Z drobiazgów to nie ma teraz licznika prędkości, który był w prawym górnym rogu strony. Czasem się przydawał.
RT2600ac + MR2200ac, DS918+
----------------------------
2*RS820RP+ (HA), 3*RS815+, 4*RS3617RPxs, RS3621RPxs
pepeEL
Trochę Wie
Posty: 71
Rejestracja: śr gru 16, 2015 9:37 pm
Lokalizacja: Philippines
Kontakt:

Re: SRM 1.2

Post autor: pepeEL »

Ja po aktualizacji zrobiłem reset do fabrycznych ustawień i od nowa skonfigurowane... Wszystko jest nowe... Vpny.... Itp
Ale tłumaczenia sa lipne. Np użycie procesora tłumaczone jako użycie komputera. Beznadzieja.

Ogólnie wrażenie pozytywne. Filtr sieciowy działa ok. Na obecną chwilę dla mnie spoko.
look12
Zawsze On-Line
Posty: 514
Rejestracja: ndz sty 24, 2016 10:46 am

Re: SRM 1.2

Post autor: look12 »

Mój też zaliczył dzisiaj zwiechę.
DS916+ /7.1-42661/
DS112+ /6.2.4-25556/
RT2600ac /SRM 1.3-9193/
Awatar użytkownika
mikhnal
Darth Vader
Posty: 2728
Rejestracja: pt gru 11, 2015 8:55 am
Lokalizacja: Warszawa

Re: SRM 1.2

Post autor: mikhnal »

Ale model 1900 czy 2600?
DS3018xs
DSM 7.2.1-69057 Update 4
32GB RAM 2x KSM24SED8/16ME DDR4 2400 CL17 ECC mod
6x 10TB WD Red WD100EFAX RAID5 btrfs
2x SNV3500-400G read/write SSD cache @ E10M20-T1 + 10GbE LAN
2x Noctua NF-A9 fan mod
RT6600ax + WRX560
SRM 1.3.1-9346 Update 9
Awatar użytkownika
mikhnal
Darth Vader
Posty: 2728
Rejestracja: pt gru 11, 2015 8:55 am
Lokalizacja: Warszawa

Re: SRM 1.2

Post autor: mikhnal »

Sorki za wcześniejsze pytanie, ale w Tapatalku nie widać stopek.
DS3018xs
DSM 7.2.1-69057 Update 4
32GB RAM 2x KSM24SED8/16ME DDR4 2400 CL17 ECC mod
6x 10TB WD Red WD100EFAX RAID5 btrfs
2x SNV3500-400G read/write SSD cache @ E10M20-T1 + 10GbE LAN
2x Noctua NF-A9 fan mod
RT6600ax + WRX560
SRM 1.3.1-9346 Update 9
look12
Zawsze On-Line
Posty: 514
Rejestracja: ndz sty 24, 2016 10:46 am

Re: SRM 1.2

Post autor: look12 »

U mnie wyglądało to tak. Sieć wi-fi była widoczna, ale nie dało się do niej zalogować, wolał hasła (na iOS, W10) - jego podanie nie dawało możliwości zalogowania się do sieci. Po ethernet komp dostał adres IP z innej adresacji którą używam bez dostępu do internetu.
Pobieżnie przeszperałem logi ale nic ciekawego nie znalazłem.
Na razie chodzi.
DS916+ /7.1-42661/
DS112+ /6.2.4-25556/
RT2600ac /SRM 1.3-9193/
ODPOWIEDZ