SRM 1.2

#1
Wreszcie wydany SRM 1.2
https://global.download.synology.com/do ... c_7742.pat

(2018-10-04)
What'S New

Added the build-in application Wi-Fi Connect for wireless related settings.
Added support for Mesh Wi-Fi on RT2600ac and MR2200ac.
Added support for Mesh Wi-Fi system in AP mode on RT2600ac and MR2200ac.
Added Network Map support for Wi-Fi system management on RT2600ac and MR2200ac.
Added support for enabling/ disabling Wi-Fi password mask.
Added support for WPA3 Personal/Enterprise security encryption on RT2600ac and MR2200ac.
Added support for Wi-Fi Enhanced Open (OWE) security encryption on RT2600ac and MR2200ac.
Added support for Smart Connect in Guest Network on RT2600ac and MR2200ac.
Added support for Guest Portal in Guest Network.
Added support for Password Rotation in Guest Network.
Added support for applying MAC filters to the Primary Wi-Fi Network alone or to the Guest Network as well.
Added support for enabling/disabling AMDPU.
Added the build-in package Safe Access for parental control and security related settings.
Added support for the Threat Prevention package.
Added support for DHCP options in ISP settings during the first time installation.
Add support for manual IPv6 setup when the primary network interface is set at PPPoE.
Added support for auto device name detection and more icons on the device list.
Added support for TCP reset, SYN flood and ICMP flood options in DoS protection.
Added support for Zero-wait DFS on RT2600ac.
Added support for auto updates of databases including IP Geolocation, Domain Name, Google Safe Browsing and Threat Intelligence.
Added support DHCPv6-PD and IPv6 Relay on RT1900ac with Client mode.
Fixed Issues

Fixed an issue where Smart WAN might not work properly with Policy Route settings.
Fixed an issue where the MTU can be set under 1280 with IPv6.
Fixed an issue where SRM might fail to finish the First Time Installation on macOS via Wi-Fi.
Fixed an issue where SRM web interfaces might not be accessible.
Fixed an issue where Log Center might not record properly.
Fixed an issue where MAC addresses might be changed on RT1900ac when the network interface is set at Secondary WAN.
Fixed an issue where the link of Traffic Report might fail to show multiple DDNS addresses.
Fixed an issue where MAC clone cannot be enabled through PPPoE.
Fixed an issue where certain items of Traffic Control and Firewall might not display properly when they are selected.
Fixed an issue where Guest Network might access private networks.
Fixed an issue where the connection speed might decrease when LG V30 Plus is used as the USB tethering device.
Fixed an issue where SRM might fail to back up and restore when the operation mode is changed.
Fixed an issue where SRM might show incorrect messages when logging out.
Fixed an issue where Pass-through might not work properly in Guest Network.
Security Updates

Fixed a security vulnerability regarding Linux kernel (CVE-2018-5391)
Known Issues and Limitations

The IPv6 tunneling page will be removed from Network Center.
Safe Access, VPN Plus Server reports will be rotated when their storage volumes reach 200MB.
iOS clients might fail to connect to Synology Router when the wireless security encryption is set at WPA2/WAP3-Personal.
Customized policies of Parental Control of devices on SRM 1.1 cannot be migrated to Safe Access on SRM 1.2.
If the Synology Router is set at Wireless Client Mode, then the web filter and security protection of Safe Access might not work correctly.
SRM cannot back up and restore IPTV settings from RT2600ac or RT1900ac to MR2200ac.
There cannot be two mesh Wi-Fi systems in one subnet.
Wi-Fi points can only be added into Wi-Fi systems via Wi-Fi. If Ethernet backhaul is connected, please remove the cable before adding new Wi-Fi points.
Intrusion Prevention not be supported on SRM 1.2 and above.
Synology DS713+ @ DSM 6.2-23739-2+upgrade RAM DDR3 4GB + TVMosaic + 2x Tuner DVBT
Synology RT2600ac @ SRM 1.1.7-6941-1+Huawei E3276s-150 backup

Re: SRM 1.2

#2
Dzięki za info!
DS3018xs
DSM 6.2.2-24922
16GB RAM DDR4 2400 CL17 ECC
6x WD Red 6TB RAID 5 btrfs
2x Samsung SM961 512GB M.2 read/write SSD cache @ M2D18
2x SilverStone FW91 fan mod
APC Back USP ES 700G
RT2600ac + MR2200ac
SRM 1.2.2-7915

Re: SRM 1.2

#3
Właściwie wszystkie pakiety zostały też zaaktualizowane. VPN trzeba też zaktualizować bo inaczej nie działa...

I zobaczymy czy szybciej działa IPS bo takie były zapewnienia Synology że w wersji 1.2 zostanie to poprawione... Tym bardziej aplikacja Intrusion Prevention już na 1.2 nie działa.
Synology DS713+ @ DSM 6.2-23739-2+upgrade RAM DDR3 4GB + TVMosaic + 2x Tuner DVBT
Synology RT2600ac @ SRM 1.1.7-6941-1+Huawei E3276s-150 backup

Re: SRM 1.2

#4
Trochę pozmieniali, nowe opcje są w parametrach wifi.
DS3018xs
DSM 6.2.2-24922
16GB RAM DDR4 2400 CL17 ECC
6x WD Red 6TB RAID 5 btrfs
2x Samsung SM961 512GB M.2 read/write SSD cache @ M2D18
2x SilverStone FW91 fan mod
APC Back USP ES 700G
RT2600ac + MR2200ac
SRM 1.2.2-7915

Re: SRM 1.2

#6
Wrażenia tak na szybko:
- w końcu można wyłączyć filtrowanie MAC dla sieci gościnnej :)
- Parental Control, a raczej nowe wcielenie, trzeba skonfigurować od zera (przynajmniej u mnie tak to wygląda po aktualizacji)
Z drobiazgów to nie ma teraz licznika prędkości, który był w prawym górnym rogu strony. Czasem się przydawał.

Re: SRM 1.2

#7
Ja po aktualizacji zrobiłem reset do fabrycznych ustawień i od nowa skonfigurowane... Wszystko jest nowe... Vpny.... Itp
Ale tłumaczenia sa lipne. Np użycie procesora tłumaczone jako użycie komputera. Beznadzieja.

Ogólnie wrażenie pozytywne. Filtr sieciowy działa ok. Na obecną chwilę dla mnie spoko.
Synology DS713+ @ DSM 6.2-23739-2+upgrade RAM DDR3 4GB + TVMosaic + 2x Tuner DVBT
Synology RT2600ac @ SRM 1.1.7-6941-1+Huawei E3276s-150 backup

Re: SRM 1.2

#8
Dziś, po aktualizacji kilka dni temu, router zaliczył kompletny zwis. Na starym SRM działał kilka lat bez problemu, a teraz zwiecha.

Po restarcie wstał na kilka minut i znów kaput.

Idealnie.

Re: SRM 1.2

#10
Ale model 1900 czy 2600?
DS3018xs
DSM 6.2.2-24922
16GB RAM DDR4 2400 CL17 ECC
6x WD Red 6TB RAID 5 btrfs
2x Samsung SM961 512GB M.2 read/write SSD cache @ M2D18
2x SilverStone FW91 fan mod
APC Back USP ES 700G
RT2600ac + MR2200ac
SRM 1.2.2-7915

Kto jest online

Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 1 gość

cron