Version: 1.2.3-8017 Update 3

#1

Version: 1.2.3-8017-3
(2019-09-24)

Fixed Issues
Fixed the issue where SRM might fail to save the IP addresses of gateways and DNS servers after the reboot of Synology Router.
Fixed the issue where PPPoE Relay might fail to work normally after the reboot of Synology Router.
Fixed the issue where SRM might display the item "40MHz only" in the 5GHz band.
Fixed the issue where IPv6 on LAN might fail to be disabled when the interface of WAN is set up by Auto WAN.
Fixed the issue where SRM cannot display Channels 120-128 of the 5GHz band in Japan.
Fixed the issue where Wi-Fi might be forced to restart when password rotation is enabled but the guest network is disabled.
Fixed an issue where SRM might fail to renew the Let's Encrypt certificate after the reboot of Synology Router.


https://archive.synology.com/download/S ... ck/8017-3/
DS3018xs
DSM 6.2.2-24922 Update 3
16GB RAM DDR4 2400 CL17 ECC
6x WD Red 6TB RAID 5 btrfs
2x Samsung SM961 512GB M.2 read/write SSD cache @ M2D18
2x SilverStone FW91 fan mod
APC Back USP ES 700G
RT2600ac + MR2200ac
SRM 1.2.3-8017 Update 3

Re: Version: 1.2.3-8017 Update 3

#2
Ważna informacja

Ta aktualizacja została wycofana 1 października ze względu na szereg problemów dotyczących raportów o ruchu i planowania automatycznych aktualizacji, restartu oraz rotacji hasła Wi-Fi.

We sincerely apologize for recalling SRM 1.2.3-8017 Update 3. If you have already installed
Update 3, the following are known issues and possible mitigation steps:

1 - Fail to remove tasks in traffic control
2 - Traffic Control will not generate new reports
3 – Receiving the error "operation failed" when using Security Advisor
4 - Guest network passwords will not rotate

For symptoms 1-4, the next update will resolve these

5 - Reboot schedule no longer working as intended
6 - Auto update schedule no longer working as intended

For symptoms 5-6, to restore these schedules, please recreate the scheduled action

7 – When joining mesh devices into a network, you receive an incompatible version warning in Wi-Fi Connect. Certain Wi-Fi settings are disabled due to version mismatch.

For symptom 7, we suggest waiting for the next update

Workaround for editing Wi-Fi settings:
1. Remove the Wi-Fi device
2. Edit Wi-Fi settings
3. Rejoin the Wi-Fi device
(This will not fix the version warning or enable setting modification)

Kto jest online

Użytkownicy przeglądający to forum: Obecnie na forum nie ma żadnego zarejestrowanego użytkownika i 1 gość