Polskie Forum Synology

Kod: Zaznacz cały

[    4.679152] Loading iSCSI transport class v2.0-870.
[    4.685117] sata_mv sata_mv.0: version 1.28
[    4.685246] sata_mv sata_mv.0: slots 32 ports 2
[    4.692179] scsi0 : sata_mv
[    4.695489] scsi1 : sata_mv
[    4.699021] ata1: SATA max UDMA/133 irq 58
[    4.703143] ata2: SATA max UDMA/133 irq 58
[   12.525520] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[   12.705475] ata1.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[   12.712214] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[   12.735617] ata1.00: configured for UDMA/133
[   12.755485] scsi 0:0:0:0: Direct-Access     WDC      WD20EFRX-68EUZN0         82.0 PQ: 0 ANSI: 5
[   12.765166] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[   12.772970] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   12.778385] sd 0:0:0:0: [sda] Write Protect is off
[   12.783205] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   12.783271] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   12.821251]  sda: sda1 sda2 sda3 < sda5 >
[   12.826888] sd 0:0:0:0: [sda] Attached SCSI disk
[   15.765919] Delay 5 seconds to wait for disk 2 ready.
[   26.300385] ata2: link is slow to respond, please be patient (ready=0)
[   30.798719] ata2: SRST failed (errno=-16)
[   30.802750] ata2: SRST fail, set srst fail flag
[   36.346667] ata2: link is slow to respond, please be patient (ready=0)
[   40.845004] ata2: SRST failed (errno=-16)
[   40.849034] ata2: SRST fail, set srst fail flag
[   46.392953] ata2: link is slow to respond, please be patient (ready=0)
[   75.842068] ata2: SRST failed (errno=-16)
[   75.846099] ata2: SRST fail, set srst fail flag
[   75.850653] ata2: limiting SATA link speed to 1.5 Gbps
[   80.860212] ata2: SRST failed (errno=-16)
[   80.864242] ata2: SRST fail, set srst fail flag
[   80.868798] ata2: reset failed, giving up
[   80.872834] ata2: get error flags 0x1
[   80.876527] ata2: do detect tries 1
[   80.880038] ata2: device plugged sstatus 0x123
[   80.884522] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t1
[   80.891088] ata2: edma_err_cause=00000000 pp_flags=00000000, dev connect
[   80.897837] ata2: hard resetting link
[   86.848000] ata2: link is slow to respond, please be patient (ready=0)
[   90.926492] ata2: SRST failed (errno=-16)
[   90.930521] ata2: SRST fail, set srst fail flag
[   90.935075] ata2: hard resetting link
[   96.884289] ata2: link is slow to respond, please be patient (ready=0)
[  100.962781] ata2: SRST failed (errno=-16)
[  100.966812] ata2: SRST fail, set srst fail flag
[  100.971365] ata2: hard resetting link
[  106.920579] ata2: link is slow to respond, please be patient (ready=0)
[  136.009828] ata2: SRST failed (errno=-16)
[  136.013857] ata2: SRST fail, set srst fail flag
[  136.018412] ata2: limiting SATA link speed to 1.5 Gbps
[  136.023582] ata2: hard resetting link
[  141.067957] ata2: SRST failed (errno=-16)
[  141.071986] ata2: SRST fail, set srst fail flag
[  141.076540] ata2: reset failed, giving up
[  141.080574] ata2: get error flags 0x1
[  141.084259] ata2: do deep tries 1
[  148.075380] ata2: get error flags 0x1
[  148.079065] ata2: EH complete