DSM 6.1.1-15101

Awatar użytkownika
mikhnal
Darth Vader
Posty: 2728
Rejestracja: pt gru 11, 2015 8:55 am
Lokalizacja: Warszawa

DSM 6.1.1-15101

Post autor: mikhnal »

Jest nowa wersja DSM 6.1.1-15101:

http://download.synology.com/download/D ... 1.1/15101/

[quote="Synology"]

Version: 6.1.1-15101
(2017/04/25)

Important Note:
[list=1][*]The update is expected to be available for all regions within the next few days, although the time of release in each region may vary slightly.
[*]This update will restart your Synology NAS.[/list]
What's New in DSM 6.1.1:
[list=1][*]Added support for scheduled RAID scrubbing.
[*]Upgraded Samba to version 4.4.9.[/list]
Fixed Issues:
[list=1][*]Fixed an issue where the OTP might be requested repeatedly when users log in a same trusted device with different accounts.
[*]Fixed an issue where File Station might not work properly when playing slideshows of photos without thumbnails if opened via Application Portal.
[*]Fixed an issue where proxy settings cannot be changed when Let's Encrypt is in use.
[*]Fixed an issue where packages cannot be repurchased after refunds.
[*]Fixed an issue where Auto Block might fail to block addresses when the Allow List is set as an IP range.
[*]Fixed an issue where the default gateway might not be updated when a DHCP client has not received DNS information.
[*]Fixed an issue where firewall rules might not be displayed correctly when users add or remove rules on the same port.
[*]Fixed an issue where UPnP rules might fail to work properly on Synology NAS with a single Ethernet port.
[*]Fixed an issue where the DSM user interface might fail to be properly displayed when DHCP Server receives invalid DNS addresses.
[*]Fixed an issue where L2TP connections might fail to be established in kernel 4.4 when the kernel mode is enabled.
[*]Fixed an issue where an L2TP connection might fail to be established when the server address starts with a number.
[*]Enhanced the usability and display correctness of the Wake on Lan user interface.
[*]Fixed an issue where Synology NAS cannot be properly shut down when a bond has been established between Mellanox ConnectX-3 and Synology E10G17-F2.
[*]Fixed an issue where DSM might show the message of volume crash upon reboot when a single-disk SHR volume has been mounted with cache and transformed into a Disk Group.
[*]Fixed an incorrect volume display on some models where RAID Groups are supported and SHR has been enabled.
[*]Fixed an issue where SHA cannot be created when FS3017 contains over 12 drives.
[*]Fixed an issue where the settings of SMB encrypted transmission cannot be properly configured.
[*]Fixed a connection error that might occur when the name of an SMB shared folder contains consecutive spaces.
[*]Fixed an issue where Key Manager might fail to mount encrypted shared folders automatically on startup.
[*]Enhanced the stability of the iSCSI service.
[*]Fixed an issue where files cannot be written into encrypted shared folders on ext3 file system.
[*]Fixed an issue where Snapshot Replication might fail when compression is enabled for shared folders.
[*]Fixed an issue where DSM cannot be shut down properly on Qoriq or 88f6281/88f6282 platforms when JBOD volumes are in use.
[*]Enhanced the stability of the upgrade process of SHA clusters.[/list][/quote]





DS3018xs
DSM 7.2.1-69057 Update 4
32GB RAM 2x KSM24SED8/16ME DDR4 2400 CL17 ECC mod
6x 10TB WD Red WD100EFAX RAID5 btrfs
2x SNV3500-400G read/write SSD cache @ E10M20-T1 + 10GbE LAN
2x Noctua NF-A9 fan mod
RT6600ax + WRX560
SRM 1.3.1-9346 Update 9
Awatar użytkownika
michaubpl
Amator
Posty: 36
Rejestracja: sob sty 23, 2016 3:09 pm

Re: DSM 6.1.1-15101

Post autor: michaubpl »

Zainstalowane na nowym DS1515+ :D

Jednak coś z indeksowaniem multimediów jest nie tak. Szukam przyczyny.
NAS:
[ main ] Synology DS1515+ | DSM 6 | 5 x WD Red WD60EFRX ext4 (RAID 5)
Awatar użytkownika
xurc
Wtajemniczony
Posty: 191
Rejestracja: wt kwie 05, 2016 10:00 am

Re: DSM 6.1.1-15101

Post autor: xurc »

Ja zauważyłem pierwszy problem z OpenVPN. Do niedawna działał bez zarzutów, po dzisiejszej aktualizacji dostaję błąd

Kod: Zaznacz cały

Thu Apr 27 09:08:12 2017 VERIFY ERROR: depth=1, error=self signed certificate in certificate chain: C=TW, L=Taipei, O=Synology Inc., CN=Synology Inc. CA
Thu Apr 27 09:08:12 2017 OpenSSL: error:14090086:SSL routines:ssl3_get_server_certificate:certificate verify failed
Thu Apr 27 09:08:12 2017 TLS_ERROR: BIO read tls_read_plaintext error
Thu Apr 27 09:08:12 2017 TLS Error: TLS object -> incoming plaintext read error
Thu Apr 27 09:08:12 2017 TLS Error: TLS handshake failed
Wygląda na to, że konfiguracja OpenVPN-a zmieniła się i serwer korzysta z powrotem z certyfikatu na domyślnego (wystawionego przez Synology), podczas gdy niedawno przeszedłem na certyfikat z Let's Encrypt.
Niestety, aby to potwierdzić, muszę być w domu, bo nie mogę się połączyć zdalnie :) Ktoś miał podobny problem?
https://synopackage.com
https://www.facebook.com/synopackage/
Sprzęt:
DS718+ (apollolake): 2x2TB (WD RED) SHR ,8GB RAM
Poprzedni:
DS215j
krowka1978
Stały Bywalec
Posty: 329
Rejestracja: wt gru 15, 2015 6:42 pm

Re: DSM 6.1.1-15101

Post autor: krowka1978 »

W moim przypadku OpenVPN działa po aktualizacji bez zmian.
DS1513+
DSM 7.1.1
4GB RAM
5x 3TB WD RED WD30EFRX RAID 5 btrfs
DS1819+
DSM 7.2
32GB RAM ECC Kingston (2x KSM24SED8/16ME)
4x 8TB Seagate IronWolf ST8000VN004 RAID 6 btrfs
2x Seagate IronWolf 525 SSD M.2 1TB RW cache RAID 1 + E10M20T1
RT2600ac
SRM 1.3
2x MR2200ac (Mesh)
Awatar użytkownika
xurc
Wtajemniczony
Posty: 191
Rejestracja: wt kwie 05, 2016 10:00 am

Re: DSM 6.1.1-15101

Post autor: xurc »

Też podmieniałeś certyfikat na inny czy korzystasz z domyślnego od Synology?
https://synopackage.com
https://www.facebook.com/synopackage/
Sprzęt:
DS718+ (apollolake): 2x2TB (WD RED) SHR ,8GB RAM
Poprzedni:
DS215j
Przemuss
Godfather
Posty: 1305
Rejestracja: wt gru 15, 2015 12:19 pm
Lokalizacja: Żyrardów

Re: DSM 6.1.1-15101

Post autor: Przemuss »

Raporty o stanie dysków dalej nie dochodzą po aktualizacji na obu synkach.
Problem od DSM 6.1
Administratorzy dzielą się na tych, którzy robią kopie zapasowe i tych, którzy będą je robili.

Serwery NAS:
Synology DS211j, DS1511+, RS2212RP+ DS1513+

"Zasłanianie się dysleksją, to jak chwalenie się małym fiu...."- by Pati
gg 2101676
redi
Amator
Posty: 48
Rejestracja: pt gru 18, 2015 11:56 pm
Lokalizacja: BK

Re: DSM 6.1.1-15101

Post autor: redi »

Dla DS-415+ dostęp zabroniony. Może coś nie tak z wersją. Była dostępna w DSM, ale już przy próbie pobrania niewidoczna.
Awatar użytkownika
xurc
Wtajemniczony
Posty: 191
Rejestracja: wt kwie 05, 2016 10:00 am

Re: DSM 6.1.1-15101

Post autor: xurc »

xurc pisze: Wygląda na to, że konfiguracja OpenVPN-a zmieniła się i serwer korzysta z powrotem z certyfikatu na domyślnego (wystawionego przez Synology), podczas gdy niedawno przeszedłem na certyfikat z Let's Encrypt.
Niestety, aby to potwierdzić, muszę być w domu, bo nie mogę się połączyć zdalnie :) Ktoś miał podobny problem?
No i mogę teraz potwierdzić. Po aktualizacji mój NAS podmienił certyfikat na ten wygenerowany przez Synology a nie na mój z Let's Encrypt (który de facto jest ustawiony jako "domyślny"). Z drugiej strony trochę to mylące (p. screen), że mam dwa różne "domyślne" certyfikaty.
Nie masz wymaganych uprawnień, aby zobaczyć pliki załączone do tego posta.
https://synopackage.com
https://www.facebook.com/synopackage/
Sprzęt:
DS718+ (apollolake): 2x2TB (WD RED) SHR ,8GB RAM
Poprzedni:
DS215j
Awatar użytkownika
michau
Wyrocznia
Posty: 1174
Rejestracja: pt gru 18, 2015 12:03 pm
Lokalizacja: Mińsk Mazowiecki

Re: DSM 6.1.1-15101

Post autor: michau »

Z serwera znikł plik dla modelu DS1515+

Ciekawe jaka przyczyna?


Ponownie instaluję tą wersję na modelu DS1515+ zobaczę czy teraz będzie indeksacja prawidłowo działać.
NAS:
[ MASTER ] Synology DS1515+ | 16 GB RAM | DSM 7 | 5 x WD Red WD60EFRX Btrfs RAID 5
Awatar użytkownika
mikhnal
Darth Vader
Posty: 2728
Rejestracja: pt gru 11, 2015 8:55 am
Lokalizacja: Warszawa

Re: DSM 6.1.1-15101

Post autor: mikhnal »

Powiem lepiej, nie ma żadnego pliku dla Synków z prockiem C2000Gate... Dla mojego DS415+ też.
DS3018xs
DSM 7.2.1-69057 Update 4
32GB RAM 2x KSM24SED8/16ME DDR4 2400 CL17 ECC mod
6x 10TB WD Red WD100EFAX RAID5 btrfs
2x SNV3500-400G read/write SSD cache @ E10M20-T1 + 10GbE LAN
2x Noctua NF-A9 fan mod
RT6600ax + WRX560
SRM 1.3.1-9346 Update 9
ODPOWIEDZ